Brocade Mobility RFS7000-GR Controller CLI Reference Guide Manuel d'utilisateur Page 200
- Page / 607
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
186 Brocade Mobility RFS7000-GR Controller CLI Reference Guide
53-1001945-01
Global Configuration Commands
5
do
Global Configuration Commands
Use this command to run commands from either the User Exec or Priv Exec mode.
Syntax
do (command of other mode)
Parameters
None.
Example
RFS7000(config)#do ping 157.235.208.69
PING 157.235.208.69 (157.235.208.69): 100 data bytes
128 bytes from 157.235.208.69: icmp_seq=0 ttl=64 time=0.1 ms
128 bytes from 157.235.208.69: icmp_seq=1 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=2 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=3 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=4 ttl=64 time=0.0 ms
--- 157.235.208.69 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
RFS7000(config)#
NOTE
In the example above, ping is a PRIV EXEC command.
- Brocade Mobility 1
- RFS7000-GR Controller 1
- 3 User Exec Commands 107 4
- 8 Crypto-peer Instance 261 6
- 9 Crypto-ipsec Instance 271 6
- 10 Crypto-map Instance 281 6
- 12 Interface Instance 311 6
- 19 RADIUS Server Instance 449 9
- 20 Wireless Instance 483 9
- 21 RTLS Instance 559 10
- 22 SOLE Instance 579 10
- About This Document 11
- Annotated Symbols 12
- Notational Conventions 13
- 1Introduction 15
- Name Assumption 16
- CLI Overview 24
- Command Description 26
- Deleting Entries 30
- Command Output Pagination 30
- Controlling Capitalization 31
- 2Common Commands 33
- RFS7000#clrscr 34
- RFS7000(config)#exit 35
- Common commands 39
- Example (Others) 39
- Syntax (User Exec) 40
- Syntax (Priv Exec) 44
- Parameters(Global Config) 47
- IP routing status 68
- Secured Shell (SSH) server 68
- RFS7000(config)#show licenses 72
- 000 msec, dispersion 0.00 80
- RFS7000>show privilege 82
- 53-1001945-01 100
- Common to all modes 102
- Parameters 102
- <1300-1999> 103
- <2000-2699> 103
- <1-99> 103
- <100-199> 103
- Privilege / Global Config 110
- 3User Exec Commands 121
- RFS7000>enable 126
- [IP address 129
- User Exec Commands 132
- 4Privileged Exec Commands 137
- Priv Exec Command 138
- Priv Exec Command Summary 138
- Which files are tared? 140
- Untar fails..? 140
- RFS7000#show clock 146
- Sep 08 15:10:31 UTC 2006 146
- • flash:/path/file 149
- • nvram:startup-config 149
- • system:running-config 149
- RFS7000#disable 153
- RFS7000> 153
- RFS7000#mkdir TestDIR 160
- RFS7000# 160
- Directory name 160
- RFS7000#quit 165
- RFS7000 version 4.1.0.0-040GR 165
- RFS7000 login: 165
- RFS7000#reload 166
- Usage Guidelines 177
- Global Configuration Commands 184
- Eldorado(config)# 203
- Usage Guidelines 1 207
- Primary terminal line 211
- RFS7000(config)# 212
- (extended <name>) 216
- • 0 – Disables aging 217
- <1-1024> 227
- RFS7000(config)#wireless 247
- RFS7000(config-wireless)# 247
- <1-256>[] 248
- 6Crypto-isakmp Instance 251
- Diffie-Hellman group 2 257
- Diffie-Hellman group 5 257
- <seconds> 260
- 7Crypto-group Instance 265
- RFS7000(config-crypto-group)# 266
- <IP Address> 267
- Crypto Group Config Commands 273
- <A.B.C.D> 274
- 8Crypto-peer Instance 275
- RFS7000(config-crypto-peer) 276
- RFS7000(config-crypto-peer)# 280
- 9Crypto-ipsec Instance 285
- RFS7000(config-crypto-ipsec) 286
- RFS7000(config-crypto-ipsec)# 290
- Transpor t mode 290
- Tunnel mode 290
- Crypto IPSec Config Commands 294
- 10Crypto-map Instance 295
- RFS7000(config-crypto-map) 296
- (address) <list name> 300
- RFS7000(config-crypto-map)# 301
- Negates match values 301
- Crypto Map Config Commands 308
- 11Crypto-trustpoint Instance 309
- RFS7000(config-trustpoint)# 310
- Trustpoint Config commands 323
- RFS7000(config-if)#clrscr 326
- RFS7000(config-if)# 326
- Interface Config commands 333
- Sets MAC access groups ACL 334
- RFS7000(config-if)#management 335
- <512-1500> 336
- (config-if) 339
- RFS7000(config-if)#shutdown 342
- <1-4094> 347
- <1-4094 347
- <1-255> 349
- 13Spanning tree-mst Instance 351
- RFS7000(config-mst)#clrscr 352
- RFS7000(config-mst)# 352
- MST region name 357
- 14Extended ACL Instance 365
- RFS7000(config-ext-nacl)# 366
- Extended ACL Config Commands 367
- RFS7000(config-ext-nacl)#exit 372
- 15Standard ACL Instance 387
- RFS7000(config-std-nacl)# 388
- A.B.C.D/M 389
- RFS7000(config-std-nacl)#end 390
- RFS7000(config-std-nacl)#exit 391
- Standard ACL Config Commands 398
- 16Extended MAC ACL Instance 399
- RFS7000(config-ext-macl)# 400
- <0-7> 401
- <1-5000> 401
- <1-4095> 401
- • 802.1q 402
- (config-if) instance 411
- TABLE 13 DHCP config commands 416
- IP Address) 421
- RFS7000(config-dhcpclass)# 422
- <ascii stringWORD> 425
- \\0 at beginning. A single 425
- \ in the input is ignored 425
- RFS7000(config-dhcp)# 426
- RFS7000(config-dhcp)#clrscr 427
- [XX-XX-XX-XX-XX-XX 434
- XX:XX:XX:XX:XX:XX] 434
- 437
- <IP address> 438
- • b-node – Broadcast node 439
- • h-node – Hybrid node 439
- • m-node – Mixed node 439
- • p-node – Peer-to-peer node 439
- [A.B.C.D 440
- (config-dhcp) 444
- RFS7000(config-dhcpclass)#end 453
- Undo DHCP Server options 457
- WID, using (config)# mode 458
- (user classname) 458
- RFS7000(config-radsrv)#clrscr 466
- RFS7000(config-radsrv)# 466
- Enables a CRL check 467
- Command Description Ref 470
- RFS7000(config-radsrv-group)# 471
- (config-radsrv)) 473
- RADIUS group name 474
- Example–Creating a Group 484
- RADIUS Configuration Commands 485
- (0 492
- Trustpoint configuration 493
- (config-radsrv) 494
- 20Wireless Instance 497
- <1-65535> 502
- IP address 508
- Lists the channels 509
- Load balance by user account 524
- TestString zone 1 526
- <0-20> 534
- wired-to-wireless 537
- <0-30> 542
- – Multicast MAC address 543
- <1-256> 550
- RFS7000(config-wireless)#show 555
- <100-5000> 561
- <1-10> 561
- [<1-4094> 568
- <AA-BB-CC-DD-EE-FF> 574
- RFSwitch(config-rtls)#clrscr 577
- RFSwitch(config-rtls)# 577
- RFSwitch# 578
- RFSwitch(config)# 579
- <MACAA-BB-CC-DD-EE-FF> 581
- RFID tag filter 582
- RTLS Config Commands 583
- RFSwitch(config-rtls)#sole 590
- RFSwitch(config-rtls-sole)# 590
- <-90.00 - 90.00> 591
- SOLE Config Commands 594
- RFS7000 (config)# 597
Produits connexes et manuels pour Accessoires pour ordinateurs Brocade Mobility RFS7000-GR Controller CLI Reference Guide
Accessoires pour ordinateurs Brocade Mobility 5181 Access Point Product Reference Guide Manuel d'utilisateur
(428 pages)
(428 pages)
Accessoires pour ordinateurs Brocade Mobility 7131N-FGR Access Point Product Reference Manuel d'utilisateur
(593 pages)
(593 pages)
Accessoires pour ordinateurs Brocade Mobility 7131 Access Point Product Reference Guide Manuel d'utilisateur
(520 pages)
(520 pages)
Accessoires pour ordinateurs Brocade Mobility Access Point System Reference Guide (Supp Manuel d'utilisateur
(854 pages)
(854 pages)
Accessoires pour ordinateurs Brocade Enterprise Wireless LAN Antenna Specification Guid Manuel d'utilisateur
(158 pages)
(158 pages)
Accessoires pour ordinateurs Brocade Virtual ADX Switch and Router Guide (Supporting AD Manuel d'utilisateur
(374 pages)
(374 pages)
Accessoires pour ordinateurs Brocade Virtual ADX Security Guide (Supporting ADX v03.1.0 Manuel d'utilisateur
(180 pages)
(180 pages)
Accessoires pour ordinateurs Brocade Virtual ADX OpenScript API Guide (Supporting ADX v Manuel d'utilisateur
(132 pages)
(132 pages)
Accessoires pour ordinateurs Brocade Virtual ADX Server Load Balancing Guide (Supportin Manuel d'utilisateur
(408 pages)
(408 pages)
Accessoires pour ordinateurs Brocade Virtual ADX XML API Programmer’s Guide (Supporting Manuel d'utilisateur
(878 pages)
(878 pages)
Accessoires pour ordinateurs Brocade Virtual ADX Global Server Load Balancing Guide (Su Manuel d'utilisateur
(198 pages)
(198 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels