Brocade Network Advisor IP User Manual v12.1.0 Manuel d'utilisateur Page 155
- Page / 177
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Brocade Network Advisor IP User Manual 101
53-1002947-01
Individual IP device discovery
4
10. Change the Port Config credentials by completing the following steps.
NOTE
These credentials are not applicable for DCB, VDX, or VCS devices.
a. Click the Port Config Credentials tab.
FIGURE 42 Port Config credentials
b. Change the unique user name in the Login Prompt User Name field.
The user name can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters.
c. Change the password in the Login Prompt Password field.
The password can be from 8 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
d. Change the unique user name in the Enable Prompt User Name field.
The user name can be from 1 through 16 characters long, case sensitive, and allows all
printable ASCII characters.
e. Change the password in the Enable Prompt Password field.
The password can be from 8 through 16 characters long, case sensitive, and allows all
printable ASCII characters. The password display as asterisks.
11. Change the Read Only credentials by completing the following steps.
NOTE
These credentials are not applicable for DCB, VDX, or VCS devices.
a. Click the Read Only Credentials tab.
FIGURE 43 Read Only credentials
- Brocade Network Advisor 1
- Document History 2
- Contents 3
- Chapter 2 Licenses 4
- Chapter 3 Patches 4
- Chapter 4 Discovery 4
- Chapter 5 Management Groups 6
- Chapter 9 View Management 10
- Chapter 10 MRP Topology 12
- Chapter 11 Call Home 12
- Chapter 12 Third-party tools 13
- Chapter 16 VCS Management 15
- Chapter 17 Host Management 16
- Chapter 19 Telemetry 19
- Chapter 21 Zoning 20
- Chapter 22 Port Fencing 21
- Chapter 23 FICON Environments 22
- Chapter 24 IP Element Manager 23
- Chapter 29 VLAN Management 25
- Chapter 30 MPLS Management 26
- Chapter 31 VIP Servers 27
- Chapter 34 Deployment Manager 29
- Chapter 35 Performance Data 29
- Chapter 36 Frame Monitor 30
- Chapter 37 Power Center 31
- Chapter 38 Policy Monitor 31
- Chapter 39 Fault Management 32
- Chapter 41 Technical Support 34
- Chapter 42 Reports 34
- Appendix A Application menus 35
- Appendix C Event Categories 35
- Appendix D User Privileges 36
- Appendix E Device Properties 36
- Appendix G CLI Templates 36
- Chapter H Troubleshooting 36
- Appendix I Database Fields 37
- About This Document 41
- What’s new in this document 48
- Document conventions 50
- Notice to the reader 51
- Additional information 51
- Other industry resources 52
- Getting technical help 53
- Document feedback 53
- Getting Started 55
- FIGURE 1 Main window 56
- Management server and client 57
- Launching a remote client 58
- • Server IP 59
- • Server Ports 59
- Viewing active sessions 63
- Disconnecting users 63
- Viewing server properties 64
- Viewing port status 65
- Server and client ports 66
- Keyboard shortcuts 70
- Look and feel customization 71
- PostgreSQL database 72
- Licenses 81
- Entering the license key 83
- TABLE 10 SAN upgrade paths 85
- TABLE 11 IP upgrade paths 85
- License downgrade 86
- TABLE 13 MPLS downgrade paths 87
- IP product count downgrade 88
- Installing a patch 91
- Uninstalling a patch 92
- Discovery 95
- Configuration requirements 97
- Discovery of IPv6 addresses 98
- IP discovery overview 100
- VDX/VCS discovery 101
- Standalone discovery 102
- VCS fabric discovery 102
- VCS fabric rediscovery 103
- Seed switch failover 103
- VCS fabric split and merge 104
- HyperEdge stack discovery 107
- IP SNMP credentials 109
- Adding SNMPv3 credentials 111
- Editing SNMPv3 credentials 113
- Default IP user credentials 115
- Adding user credentials 116
- FIGURE 17 Enable Super User 117
- IP Object identifier filters 121
- Excluding product types 122
- FIGURE 19 Preferences tab 123
- IP discovery profiles 127
- Configuring address ranges 129
- Adding CIDR subnet addresses 130
- Adding subnet addresses 131
- Adding IP addresses 131
- Excluding subnet addresses 132
- Editing address ranges 133
- Editing CIDR subnet addresses 134
- Editing subnet addresses 134
- Editing IP addresses 134
- Scheduling discovery 135
- Editing a discovery schedule 139
- FIGURE 34 Preferences tab 142
- Deleting a discovery profile 143
- Starting discovery manually 143
- Stopping discovery 144
- Viewing discovery status 144
- Viewing discovery reports 145
- E-mailing discovery reports 145
- Exporting discovery reports 146
- Viewing the discovery log 146
- FIGURE 36 SNMPv3 credentials 148
- Editing IP device discovery 151
- FIGURE 39 SNMPv3 credentials 152
- FIGURE 40 SNMPv1/v2c settings 153
- Host discovery 157
- Importing Hosts from a Fabric 160
- Icon Description 166
- VM Manager discovery 167
- Editing a VM manager 169
- • Active 171
- • Failed – Not reachable 171
- IP Rediscovery 172
- Rediscovering a group 174
- Management Groups 175
- Product group overview 176
- Static product groups 177
- Dynamic product groups 179
- Viewing test results 183
- TABLE 20 184
- Port Groups 185
- Creating a port group 186
- Editing a port group 186
- Duplicating a port group 187
- Viewing port group properties 188
- Deleting a port group 189
- Application Configuration 191
- Server Data backup 192
- Management server backup 193
- Configuring backup 193
- Enabling backup 195
- Disabling backup 196
- Viewing the backup status 196
- Changing the backup interval 196
- Starting immediate backup 197
- Reviewing backup events 197
- Server Data restore 198
- Event storage settings 199
- Flyover settings 201
- Turning flyovers on or off 202
- Viewing flyovers 202
- Name settings 203
- Viewing names 204
- Adding a name to a new device 206
- Removing a name from a device 207
- Editing names 208
- Exporting names 208
- Importing Names 208
- Searching for a device by WWN 209
- Configuring the server name 210
- Configuring login security 211
- Syslog Registration settings 212
- Software Configuration 216
- • Select All. Go to step 4 217
- IP preferences 220
- Configuring SNMP preferences 226
- Configuring TFTP preferences 226
- Memory allocation settings 227
- Configuring asset polling 229
- Configuring SAN communication 230
- Configuring IP communication 232
- FTP/SCP/SFTP server settings 233
- Server port settings 238
- Support mode settings 239
- FIPS Support 241
- Fabric tracking 241
- Disabling fabric tracking 242
- User Account Management 247
- Viewing configured users 248
- User accounts 250
- Creating a new user account 251
- Editing a user account 252
- Copying a user account 253
- Disabling a user account 255
- Enabling a user account 255
- Deleting a user account 255
- Unlocking a user account 256
- Creating a new role 256
- Editing a role 257
- Copying a role 258
- Deleting a role 258
- Adding privileges to a role 258
- Areas of responsibility 260
- Editing an AOR 261
- Copying an AOR 262
- Deleting an AOR 262
- Assigning products to an AOR 263
- Password policies 264
- Loading an AD group 268
- Deleting an AD group 269
- Creating an AD user account 269
- User profiles 271
- Viewing your user profile 272
- Editing your user profile 273
- Changing your password 273
- Viewing your password policy 274
- Resetting optional messages 275
- Configuring CLI credentials 275
- Dashboard Management 277
- FIGURE 81 Dashboard tab 278
- Dashboard toolbar 279
- Dashboard messages 280
- General dashboard functions 281
- Accessing a dashboard 281
- Filtering the dashboards list 282
- Setting the dashboard display 283
- • Type — The type of monitor 284
- Setting the network scope 286
- Default dashboards 289
- Status widgets 290
- Access Point Status widget 291
- Events widget 292
- Host Adapter Inventory widget 294
- IP Inventory widget 295
- IP Status widget 297
- Status widget 299
- Performance monitors 300
- Top Port C3 Discards monitor 303
- Top Port CRC Errors monitor 305
- Top Port Discards monitor 307
- Top Port Errors monitor 309
- Top Port Receive EOF monitor 312
- Top Port Sync Losses monitor 313
- Top Port Traffic monitor 315
- Monitor types 327
- Measures 327
- TABLE 28 Port measures types 331
- View Management 343
- IP main toolbar 345
- Product List toolbar 346
- Host Product List toolbar 347
- Topology Map toolbar 347
- Host topology map toolbar 348
- IP Product List 348
- Product List functions 349
- Topology Map 350
- Master Log 351
- FIGURE 120 IP Minimap 352
- Status bar 353
- Icon legend 355
- Host product icons 356
- IP group icons 356
- IP port icons 356
- IP product status icons 357
- Event icons 357
- Customizing the main window 358
- Displaying columns 359
- Changing the order of columns 360
- Resizing the columns 360
- Sorting table information 360
- Copying table information 360
- Exporting table information 361
- Product List customization 362
- Editing a property label 363
- Deleting a property label 363
- Searching for a device 364
- Restricting a search by node 365
- Searching for an exact match 365
- Address Finder 366
- Finding IP addresses 367
- Finding MAC addresses 369
- IP topology view manager 371
- Network Objects view 372
- IP Topology view 374
- L2 Topology view 374
- Ethernet Fabrics view 375
- VLAN Topology view 375
- STP/RSTP topology 376
- Generating an STP/RSTP Report 377
- Exporting an STP/RSTP Report 377
- Host Topology view 378
- IP topology map components 380
- TABLE 37 Legend components 381
- Topology map layout 382
- Orthogonal 384
- Orthogonal (Merge Lines) 384
- Hierarchical 385
- Circular 385
- Free Form 385
- Creating a customized layout 387
- Customizing the Topology Map 388
- Exporting the topology 391
- Printing a map 391
- Port actions 393
- • Real Time Graph/Table 395
- • Historical Graph/Table 395
- MRP Topology 397
- Viewing a MRP Topology map 398
- Viewing a MRP ring 399
- TABLE 39 400
- • Fast Organic 402
- • Organic 403
- • Hierarchical 403
- • Self Organizing 404
- • Circular 404
- Refreshing MRP Topology data 407
- Viewing MRP properties 407
- Call Home 409
- overview 410
- System requirements 411
- Showing a Call Home center 414
- Hiding a Call Home center 414
- Editing a Call Home center 415
- Enabling a Call Home center 422
- Enabling supportSave 422
- Disabling a Call Home center 423
- Viewing Call Home status 424
- Defining an event filter 426
- Third-party tools 431
- Launching a Telnet session 432
- Launching an Element Manager 432
- Launching HCM Agent 433
- Adding a tool 434
- Server Management Console 441
- Services tab 442
- Refreshing the server status 443
- Stopping all services 443
- Stopping the CIMOM services 443
- Starting all services 444
- Restarting all services 444
- Ports tab 445
- AAA Settings tab 446
- Configuring a Radius server 447
- Configuring an LDAP server 451
- Configuring a TACACS+ server 453
- • Local Database 456
- Restore tab 458
- HCM Upgrade tab 460
- SAN Device Configuration 461
- Deleting a configuration 470
- Exporting a configuration 470
- Importing a configuration 470
- Replicating configurations 471
- Step 2. Configuration Type 472
- Step 3. Source Location 472
- Step 4. Source Configuration 472
- Step 5. Destination Switches 474
- TABLE 45 Step 6. Validation 475
- TABLE 46 Step 7. Summary 475
- TABLE 50 Step 5. Validation 477
- TABLE 51 Step 6. Summary 477
- Firmware management 478
- FIGURE 152 Firmware download 479
- Importing a firmware file 482
- Deleting a firmware file 483
- Viewing port connectivity 484
- Enabling a port 487
- Disabling a port 487
- Filtering port connectivity 487
- Resetting the filter 488
- Viewing port details 489
- Viewing ports 489
- Port types 490
- Showing connected ports 490
- • Connection properties 491
- Determining port status 494
- Viewing port optics 495
- Port commissioning overview 497
- Registering a CIMOM server 499
- Example 501
- Decommissioning an F-Port 503
- Recommissioning an F-Port 504
- Decommissioning an E-Port 504
- Recommissioning an E-Port 504
- AD-enabled fabric discovery 508
- Feature AD context 509
- Wireless Management 513
- Wireless devices 514
- Wireless device discovery 514
- Port groups 515
- View management 516
- Wireless device properties 516
- Element Manager 516
- Launching the Element Manager 517
- CLI configuration management 519
- Cluster mode 520
- VLAN management 520
- Performance management 521
- Policy Monitors 521
- Fault management 521
- AP Products report 522
- Detailed AP Products report 523
- VCS Management 525
- VCS mode types 526
- Network OS 531
- VCS product groups 532
- Port profiles 533
- Life of a port profile 534
- AMPP events and behavior 534
- • “Comparing port profiles” 536
- • “Deploying port profiles” 536
- Comparing port profiles 538
- Deploying port profiles 540
- FRU monitoring 542
- System thresholds 542
- Alert notifications 542
- Resource monitoring 543
- SFP parameter monitoring 543
- Security monitoring 544
- Port statistics monitoring 544
- Interface error types 544
- Ethernet fabric traceroute 545
- Ethernet_Fabric 547
- Exporting diagnostic data 548
- Host Management 549
- Brocade adapters 550
- Converged Network Adapters 551
- Fabric Adapters 551
- HCM software 552
- HCM features 553
- Host adapter discovery 554
- VM Manager 554
- Editing a VM Manager 555
- Deleting a VM Manager 555
- ESXi CIM listener ports 555
- Adapter software 557
- Driver repository 558
- Boot image repository 560
- Bulk port configuration 562
- Adding a port configuration 563
- Editing a port configuration 566
- Deleting a port configuration 566
- FAWWNs on attached AG ports 569
- Adding AG port FAWWNs 570
- Deleting AG port FAWWNs 571
- Role-based access control 572
- Host performance management 573
- Host security authentication 574
- Host fault management 576
- Filtering event notifications 577
- Backup support 578
- Fibre Channel over Ethernet 581
- Enhanced Ethernet features 582
- FCoE protocols supported 583
- FCoE licensing 584
- Saving running configurations 584
- DCB configuration management 586
- Switch policies 587
- DCB configuration 588
- Configuring LLDP 590
- Adding a LAG 593
- FIGURE 189 Add LAG dialog box 594
- Editing a DCB switch 595
- Editing a DCB port 597
- Editing a LAG 598
- Enabling a DCB port or LAG 600
- QoS configuration 601
- Priority-based flow control 602
- Creating a DCB map 602
- Editing a DCB map 604
- Deleting a DCB map 604
- Creating a Traffic Class map 606
- Editing a Traffic Class map 606
- Deleting a Traffic Class map 607
- FCoE provisioning 608
- VLAN classifier configuration 610
- • ARP — 0x0808 611
- • IP — 0x8881 611
- • IPv6 — 0x86DD 611
- LLDP-DCBX configuration 614
- Adding an LLDP profile 615
- Editing an LLDP profile 616
- Deleting an LLDP profile 616
- 802.1x authentication 618
- FIGURE 197 802.1x dialog box 619
- Deploy to Products dialog box 621
- Deploy to Ports dialog box 621
- Supported VCS platforms 625
- Viewing switches in VCS mode 626
- Viewing ports in VCS mode 629
- QoS - Non-DCB 631
- Viewing LAGs in VCS mode 633
- DCB performance 637
- Historical performance graph 639
- Historical performance report 639
- FCoE login groups 640
- Adding an FCoE login group 641
- Editing an FCoE login group 642
- Viewing virtual FCoE ports 644
- Clearing a stale entry 646
- Telemetry 647
- Viewing existing PBR policies 648
- Adding a new policy 650
- Adding rules to a policy 650
- • ACL Name — Name of the ACL 651
- Editing a policy 652
- Editing a rule 652
- Deleting a policy or rule 653
- ACL Accounting 658
- Viewing ACL counters 659
- Security Management 661
- Device_Name 662
- • Any — Any of the protocols 664
- Port_Number 667
- Fabric_Name 678
- FIGURE 219 681
- Clearing L3 ACL assignments 697
- Configuring hit statistics 698
- Network configuration 703
- Creating a network 704
- Editing a network 705
- Copying a network 706
- Deleting a network 706
- Network group configuration 707
- Creating a network group 708
- Editing a network group 709
- Copying a network group 710
- Service configuration 712
- Viewing existing services 713
- Creating a service 714
- Editing a service 715
- Copying a service 715
- Deleting a service 716
- Service group configuration 717
- Creating a service group 718
- Editing a service group 719
- Copying a service group 720
- Deleting a service group 721
- • = (equal to) 724
- • != (not equal to) 724
- • > (greater than) 724
- • < (less than) 724
- Editing a MAC filter 725
- Copying a MAC filter 726
- Deleting a MAC filter 728
- Assigning MAC filters 728
- Zoning overview 737
- Online zoning 738
- Offline zoning 739
- Zoning naming conventions 739
- Zone database size 740
- Zoning configuration 740
- Creating a zone 741
- Viewing zone properties 741
- Adding members to a zone 742
- Creating a member in a zone 743
- Removing a member from a zone 744
- Renaming a zone 744
- Deleting a zone 745
- Duplicating a zone 745
- Creating a zone alias 747
- Editing a zone alias 748
- Exporting zone aliases 749
- Renaming a zone alias 749
- Deleting a zone alias 749
- Duplicating a zone alias 750
- Creating a zone configuration 750
- Renaming a zone configuration 754
- Refreshing a zone database 757
- Merging fabrics 758
- Merging two zone databases 758
- Zoning administration 762
- Listing zone members 768
- Listing un-zoned members 769
- Removing an offline device 769
- Replacing zone members 770
- Port Fencing 773
- Thresholds 776
- C3 Discard Frames threshold 777
- Invalid CRCs threshold 778
- Invalid words threshold 778
- Link Reset threshold 778
- Protocol error threshold 778
- State Change threshold 778
- Adding thresholds 779
- Adding a Link Reset threshold 783
- Assigning thresholds 787
- Unblocking a port 788
- Editing thresholds 789
- Finding assigned thresholds 793
- Viewing thresholds 793
- Removing thresholds 794
- FICON Environments 797
- Planning the configuration 798
- Configuring the switch 800
- • “Enabling Virtual Fabrics” 802
- Configuring FICON display 804
- Changing window arrangement 811
- Clearing port names 811
- Cascaded FICON fabric 812
- Enabling DLS 814
- Cascaded FICON fabric merge 815
- Resolving merge conflicts 819
- Viewing port groups 822
- Swapping blades 823
- IP Element Manager 825
- Switch properties 828
- Properties dialog box 829
- Element Manager toolbar 830
- Displaying port properties 831
- Status indicator icons 834
- Table capabilities 835
- Performance data 835
- Configure VLAN dialog box 836
- Web Management interface 837
- TABLE 93 Troubleshooting 838
- Configuration repository 839
- Viewing the configuration 844
- FIGURE 282 Compare dialog box 845
- Restoring a configuration 846
- • Startup 847
- • Startup and Reload 847
- Configuration deviation 849
- Change tracking 850
- Configuration snapshots 851
- FIGURE 286 Compare dialog box 853
- • Not Applicable 855
- Schedule backup 859
- Disabling a backup schedule 861
- IP Configuration Wizard 863
- Payloads 864
- Interface Payloads: 865
- Payload name Description 865
- • Save to Flash 869
- • Save to Flash and Reload 869
- CLI Configuration Management 875
- CLI configuration overview 875
- Viewing existing templates 876
- Changing product credentials 882
- Previewing CLI commands 884
- CLI command guidelines 885
- Testing a configuration 887
- CLI configuration deployment 892
- Monitoring configurations 893
- CLI deployment reports 900
- CLI configuration scheduling 901
- Obtaining software files 905
- Boot image management 906
- Software image management 909
- Unified image management 912
- Updating unified images 914
- VLAN Management 917
- Private VLAN 918
- Remote Switched Port Analyzer 918
- Displaying a list of VLANs 919
- VLAN Manager tabs 920
- Displaying VLANs by products 922
- Port VLANs 923
- Assigning DCB ports to a VLAN 926
- Adding VLAN properties 927
- Deploying VLAN configurations 930
- Target context STP type 932
- Configuring MSTP on a product 934
- Adding an MSTP instance 935
- VLAN routing 936
- MPLS Management 939
- MPLS licensing 940
- MPLS overview 941
- • Setup priority for the LSP 943
- • Metric for the LSP 943
- Viewing LSP path information 944
- Viewing RSVP LSP information 945
- Adding an LSP admin group 946
- Editing an LSP admin group 948
- Deleting an LSP admin group 949
- Adding an LSP path 949
- Editing an LSP path 950
- Duplicating an LSP path 951
- Deleting an LSP path 951
- FIGURE 336 Bypass LSP 958
- Editing an RSVP LSP 959
- Duplicating an RSVP LSP 959
- Deleting an RSVP LSP 959
- Displaying LSP Topologies 961
- LSP Topology View Options 962
- MPLS Domain 963
- VLL manager 964
- Viewing VLL instances 965
- Editing a VLL instance 976
- Deleting VLL instances 976
- VPLS Manager 980
- Configuring endpoint settings 986
- Editing a VPLS instance 991
- Deleting a VPLS instance 991
- VCID pools 993
- 53-1002947-01 1000
- Editing a MEP 1002
- Sending a loopback message 1007
- Sending a linktrace message 1008
- Configuring frame delay 1010
- VIP Servers 1013
- Server port statistics 1017
- Global Server Load Balancing 1019
- Viewing the GSLB Manager 1020
- GSLB policy management 1021
- GSLB site management 1027
- GSLB zone configuration 1029
- Adding a host to a zone 1031
- Deleting a zone configuration 1032
- Controller configuration 1033
- • Metric used 1035
- Scheduling a deployment 1036
- In this chapter 1039
- SSL certificates 1039
- SSL certificate configuration 1040
- Creating key passwords 1053
- Appending SSL certificates 1054
- Chaining SSL certificates 1054
- Deleting SSL certificates 1056
- Deployment Manager 1057
- Deploying a configuration 1059
- Viewing deployment logs 1059
- Performance Data 1063
- SAN performance measures 1064
- Example of SNMP v1 1066
- Example of setting SNMP v1 1066
- SAN performance overview 1067
- Graph display 1072
- IP configuration requirements 1074
- Adding measures to products 1078
- Adding measures to ports 1079
- Removing measures from ports 1080
- Configuring graph options 1083
- FIGURE 393 Data points graph 1085
- FIGURE 394 Show events graph 1085
- Exporting a graph 1086
- Printing a graph 1087
- Editing system collectors 1088
- • Click Add 1098
- Deleting an expression 1099
- SAN FCIP tunnel display 1101
- Mouse functions for graphs 1104
- MIB data collectors 1105
- IP Custom performance reports 1106
- Up to 2 years 1 day 1108
- IP sFlow configuration 1112
- TABLE 104 Interface Payload 1113
- Creating custom sFlow reports 1116
- 3. Click Add 1127
- Selecting a report 1131
- • Disable a port 1132
- • Enable a port 1132
- Show DNS Name 1133
- Include Remaining Talkers 1133
- Date and time 1133
- Viewing top MAC talkers 1135
- Viewing top VLAN talkers 1135
- ID of the well-known port 1137
- Viewing IPv4 – Others 1141
- Viewing IPv6 Top Talkers 1141
- Valid TCP flags report 1144
- Viewing BGP paths report 1145
- IP traffic accounting 1146
- Frame Monitor 1149
- Frame types 1150
- Frame Monitoring requirements 1151
- Editing a frame monitor 1153
- Power Center 1157
- Data monitoring 1158
- Viewing PoE data for ports 1159
- Filtering port details 1160
- Viewing PoE charts 1163
- Refreshing PoE data 1166
- PoE power on demand 1167
- Schedule_Name 1176
- PoE thresholds 1178
- Adding a PoE port threshold 1180
- Viewing PoE thresholds 1182
- Updating a PoE threshold 1183
- Enabling PoE thresholds 1184
- Disabling PoE thresholds 1184
- Viewing PoE performance 1185
- • Allocation (W) 1186
- • Allocation % 1186
- • Consumption % 1188
- Policy Monitor 1191
- Fabric policy monitors 1192
- Host policy monitors 1195
- Policy monitor overview 1197
- Preconfigured policy monitors 1198
- Viewing policy monitor status 1199
- Adding a policy monitor 1200
- Policy monitor scheduling 1206
- Editing a policy monitor 1207
- Deleting a policy monitor 1208
- Configuration rules 1208
- Adding a configuration rule 1212
- Editing a configuration rule 1215
- Deleting a configuration rule 1216
- Selecting a product 1219
- Predefined conditions 1221
- Adding a configuration block 1224
- Predefined blocks 1227
- Running a policy monitor 1228
- Fault Management 1233
- Event notification 1234
- ATTENTION 1235
- Defining filters 1236
- SNMP traps 1239
- SNMP trap forwarding 1241
- Adding a trap destination 1242
- Adding a new trap filter 1243
- Event reception 1245
- Adding an SNMP v3 credential 1247
- Trap customization 1249
- Registering traps 1250
- - Information about the trap 1251
- SNMP informs 1252
- Adding a syslog recipient 1253
- Removing a syslog recipient 1254
- Syslog forwarding 1254
- Adding a syslog filter 1256
- Snort message forwarding 1257
- Event action definitions 1258
- - Traps (default) 1259
- - Application Events 1259
- - Pseudo Events 1259
- - Custom Events 1259
- - Snort® Message 1259
- Configuring varbind filters 1260
- Editing event actions 1265
- Special events handling 1268
- Acknowledging special events 1269
- Pseudo events 1274
- Setting pseudo event policies 1275
- Filtering pseudo event traps 1276
- Event custom reports 1285
- Defining report settings 1286
- Defining the report identity 1287
- 4. Click the Filter tab 1290
- Editing a report definition 1293
- Event custom report schedules 1294
- Event logs 1297
- Copying an entire log entry 1298
- Exporting the entire log 1298
- TABLE 112 Event Properties 1300
- Copying the entire Master Log 1301
- Exporting the Master Log 1301
- The ‘unnamed’ filter 1303
- The ‘none’ filter 1304
- Editing a Filter 1304
- Duplicating a Filter 1304
- Deleting a Filter 1304
- Notes on filters 1304
- Packet Capture (Pcap) 1305
- C:\\SNORT\bin\SNORT.exe -c 1306
- Technical Support 1307
- Device technical support 1311
- Field Description 1316
- Field/Component Description 1317
- Reports overview 1321
- Viewing IP reports 1322
- IP report contents 1323
- IP Wired Products report 1324
- Detailed Product Report 1326
- Detailed Cluster Report 1330
- IP Module report 1332
- IP Port VLANs report 1333
- IP Layer 3 VLAN report 1333
- IP Subnet report 1334
- IP Address report 1335
- MAC Address report 1335
- IP Deployment reports 1338
- Preconfigured reports 1339
- User-defined reports 1339
- Viewing a report 1341
- Importing a report template 1342
- Exporting a report template 1342
- Deleting reports 1342
- Report content and functions 1343
- Products List report 1344
- Ports Tx/Rx Ratio report 1349
- Low Traffic Ports report 1351
- Application menus 1353
- IP main menus 1354
- IP shortcut menus 1360
- • L2 Cloud 1361
- Call Home Event Tables 1367
- Event Categories 1369
- Product audit events 1370
- Security events 1371
- User action events 1372
- Management server events 1372
- Product events 1373
- User Privileges 1375
- About user privileges 1376
- • Fabric Ports 1380
- • Fabric Summary 1380
- IP privileges and behavior 1387
- About Roles and Access Levels 1390
- Device Properties 1393
- Viewing SAN device properties 1394
- SAN device properties 1395
- Device properties (Continued) 1395
- Viewing Storage properties 1397
- Viewing port properties 1401
- TABLE 141 Port properties 1402
- • Authentication Algorithm 1403
- • Encryption Algorithm 1403
- • Diffie-Hellman 1403
- • SA Life 1403
- Port properties (Continued) 1404
- • IP Ping 1405
- • IP Traceroute 1405
- • IP Performance 1405
- IP device properties 1406
- Viewing VCS fabric properties 1410
- Host properties 1418
- Properties customization 1420
- Adding a property field 1421
- Editing a property field 1421
- Deleting a property field 1422
- Regular Expressions 1423
- TABLE 2 Character classes 1424
- TABLE 1 Characters 1424
- TABLE 7 Boundary matches 1425
- TABLE 8 Greedy quantifiers 1426
- TABLE 9 Reluctant quantifiers 1426
- TABLE 11 Logical operators 1426
- TABLE 12 Back references 1427
- CLI Templates 1429
- TABLE 31 MCT Cluster Deletion 1433
- TABLE 32 MCT Client Creation 1433
- TABLE 33 MCT Client Deletion 1434
- Troubleshooting 1447
- Browser troubleshooting 1448
- Problem Resolution 1449
- Launch Client troubleshooting 1451
- Patch troubleshooting 1453
- Server troubleshooting 1457
- Supportsave troubleshooting 1459
- Wireless troubleshooting 1460
- Zoning troubleshooting 1461
- Database Fields 1463
- TABLE 102 ACH_FILTER 1464
- TABLE 103 ACH_INFO 1464
- TABLE 104 AD_GROUP 1464
- TABLE 108 AOR_DEVICE_MAP 1465
- TABLE 109 AOR_FABRIC_MAP 1465
- • 1 - Text Box 1466
- • 2 - List Box 1466
- • 3 - Radio Button 1466
- Database tables and fields 1467
- BIRTREPORT_RUN_TEMPLATE 1467
- BIRTREPORT_SCHEDULE_CONFIG 1467
- TABLE 118 BOOT_LUN_SEQUENCE 1468
- TABLE 120 CAPABILITY_ 1468
- TABLE 121 CARD 1468
- TABLE 121 CARD (Continued) 1469
- • 0 - 1G 1470
- • 1 - 10G 1470
- • 2 - Dual mode 1470
- • 3 - Failover mode 1470
- TABLE 127 CLIENT_VIEW 1471
- TABLE 129 CLIENT_VIEW_MEMBER 1472
- TABLE 131 CLUSTER 1472
- TABLE 132 CLUSTER_MEMBER 1472
- TABLE 133 CNA_ETH_PORT 1473
- TABLE 135 CNA_ETH_PORT_CONFIG 1473
- TABLE 136 CNA_PORT 1474
- TABLE 137 COLLECTOR 1474
- TABLE 141 CORE_SWITCH 1475
- CORE_SWITCH (Continued) 1476
- TABLE 145 CORE_SWITCH_DETAILS 1477
- • 1 is supported 1478
- • 0 is not supported 1478
- TABLE 146 CRYPTO_HOST 1479
- TABLE 147 CRYPTO_LUN 1480
- CRYPTO_LUN (Continued) 1481
- TABLE 148 CRYPTO_SWITCH 1482
- CRYPTO_TARGET_CONTAINER 1483
- CRYPTO_SWITCH (Continued) 1483
- TABLE 151 DASHBOARD 1484
- TABLE 152 DASHBOARD_CANVAS 1485
- TABLE 154 DASHBOARD_PROVIDER 1485
- TABLE 155 DASHBOARD_WIDGET 1486
- TABLE 157 DEFAULT_FAVORITES 1487
- DEFAULT_WIDGET_PREFERENCE 1488
- DEPLOYMENT_CONFIGURATION 1488
- DEFAULT_FAVORITES (Continued) 1488
- • 1-Presnapshot 1489
- • 2-Postsnapshot 1489
- • 3-Pre & Post snapshot 1489
- TABLE 162 DEPLOYMENT_STATUS 1490
- TABLE 164 DEVICE 1491
- TABLE 164 DEVICE (Continued) 1492
- • 0 indicates not registered 1493
- • 1 indicates registered 1493
- TABLE 165 DEVICE_ENCLOSURE 1497
- TABLE 167 DEVICE_FDMI_DETAILS 1498
- TABLE 168 DEVICE_GROUP 1499
- TABLE 169 DEVICE_GROUP_ENTRY 1500
- TABLE 170 DEVICE_NODE 1500
- TABLE 171 DEVICE_PORT 1501
- TABLE 174 ENCRYPTION_ENGINE 1502
- TABLE 175 ENCRYPTION_GROUP 1503
- ENCRYPTION_GROUP (Continued) 1504
- ENCRYPTION_GROUP_MEMBER 1505
- ENCRYPTION_KMIP_PARAMETERS 1505
- TABLE 179 ETHERNET_CLOUD 1506
- TABLE 180 ETHERNET_INTERFACE 1507
- TABLE 181 ETHERNET_ISL 1507
- TABLE 182 EVENT 1507
- TABLE 183 EVENT_CALL_HOME 1508
- TABLE 182 EVENT (Continued) 1508
- TABLE 184 EVENT_CATEGORY 1509
- TABLE 185 EVENT_DESCRIPTION 1509
- TABLE 186 EVENT_DETAILS 1509
- TABLE 187 EVENT_INSTANCE 1510
- TABLE 189 EVENT_PROCESSOR_MAP 1511
- TABLE 190 EVENT_RULE 1511
- • 0 = Disabled 1512
- • 1 = Enabled 1512
- • 0 = second 1512
- • 1 = Minutes 1512
- • 2 = Hours 1512
- TABLE 191 FABRIC (Continued) 1513
- TABLE 192 FABRIC_CHECKSUM 1514
- TABLE 193 FABRIC_COLLECTION 1514
- TABLE 194 FABRIC_MEMBER 1514
- TABLE 198 FAVORITES 1515
- TABLE 201 FCIP_TUNNEL 1516
- FCIP_TUNNEL (Continued) 1517
- FCIP_TUNNEL_CIRCUIT 1519
- FCIP_TUNNEL_PERFORMANCE 1521
- TABLE 204 FCOE_DEVICE 1522
- TABLE 205 FCR_ROUTE 1523
- TABLE 206 FEATURE 1523
- TABLE 207 FEATURE_EDITION_MAP 1523
- TABLE 208 FEATURES_USAGE 1523
- TABLE 209 FICON_DEVICE_PORT 1523
- FIRMWARE_FILE_DETAIL 1524
- FIRMWARE_SWITCH_DETAIL 1524
- FICON_DEVICE_PORT (Continued) 1524
- TABLE 212 FOUNDRY_DEVICE 1525
- TABLE 213 FOUNDRY_MODULE 1525
- TABLE 216 FPORT_TRUNK_GROUP 1526
- TABLE 217 FPORT_TRUNK_MEMBER 1526
- TABLE 218 FRU 1526
- TABLE 218 FRU (Continued) 1527
- TABLE 219 FTP_SERVER 1528
- TABLE 221 GIGE_PORT 1528
- TABLE 223 GIGE_PORT_STATS 1529
- TABLE 224 GLOBAL_VLAN 1530
- TABLE 226 HA_CLUSTER 1530
- TABLE 227 HBA 1531
- TABLE 227 HBA (Continued) 1532
- • HBA/CNA/AnyIO/Mezzanine 1533
- • 0 - Unknow 1534
- • 1 - Yes 1534
- • 2 - No 1534
- HBA_PORT_DETAIL (Continued) 1535
- HBA_PORT_DEVICE_PORT_MAP 1537
- HBA_PORT_FCOE_DETAILS 1537
- TABLE 233 HBA_REMOTE_PORT 1538
- HBA_REMOTE_PORT (Continued) 1539
- TABLE 235 HBA_TARGET 1540
- HOST_DISCOVERY_OPTION 1541
- HBA_TARGET (Continued) 1541
- TABLE 239 IFL 1542
- TABLE 240 INM_IP_INTERFACE 1542
- TABLE 241 INTERFACE 1543
- TABLE 243 IP_INTERFACE 1544
- TABLE 244 IP_PORT_GROUP 1544
- TABLE 245 IP_ROUTE 1544
- • 0 denotes untrusted 1545
- • 1 denotes trusted 1545
- • 0 denotes present 1546
- TABLE 250 ISL_TRUNK_GROUP 1547
- TABLE 251 ISL_TRUNK_MEMBER 1547
- TABLE 249 ISL_CONNECTION 1547
- TABLE 252 KEY_VAULT 1548
- TABLE 255 L2_NEIGHBOR 1549
- TABLE 256 LAG 1549
- TABLE 257 LAG_MEMBER 1550
- TABLE 256 LAG (Continued) 1550
- TABLE 260 LICENSE 1551
- TABLE 262 LICENSE_FEATURE_MAP 1552
- TABLE 263 LICENSE_RULE 1552
- TABLE 264 LICENSED_FEATURE 1553
- TABLE 265 LINK 1553
- TABLE 266 LOCK 1553
- TABLE 267 LSAN_DEVICE 1553
- TABLE 268 LSAN_TAG_CONFIG 1553
- TABLE 269 LSAN_PROXY_DEVICE 1554
- TABLE 270 LSAN_ZONE 1554
- TABLE 271 LSAN_ZONE_DB_CONFIG 1554
- • Deployed(0) 1555
- • Undeployed(1) 1555
- TABLE 278 MAPS_EVENT 1556
- TABLE 279 MAPS_EVENT_DETAILS 1556
- TABLE 281 MAPS_POLICY 1557
- TABLE 282 MARCHING_ANTS 1557
- TABLE 283 MESSAGE_RECIPIENT 1557
- TABLE 284 MODULE 1558
- TABLE 285 MODULE_SLOT_PRESENT 1558
- TABLE 286 MODULE_TYPE 1558
- TABLE 287 MPLS_ADMIN_GROUP 1559
- TABLE 289 MPLS_LSP 1559
- TABLE 290 MPLS_PATH 1559
- TABLE 291 MPLS_PATH_HOP 1560
- TABLE 292 MPLS_RSVP_LSP 1560
- Field Definition Format Size 1561
- MPLS_RSVP_LSP_PARAMETERS 1562
- TABLE 298 MPLS_RSVP_LSP_PATH 1563
- TABLE 300 MPLS_SERVICE 1563
- MPLS_SERVICE_DEVICE_RELATION 1564
- MPLS_SERVICE (Continued) 1564
- TABLE 304 MRP_RING 1565
- TABLE 305 MRP_RING_DEVICE 1565
- MRP_RING_DEVICE (Continued) 1566
- TABLE 306 N2F_PORT_MAP 1567
- TABLE 307 NETWORK_VLAN 1567
- TABLE 308 NETWORK_SCOPE_TYPE 1567
- TABLE 309 NPORT_WWN_MAP 1567
- TABLE 310 NP_FLOW_DEFINITION 1567
- TABLE 311 NP_SUB_FLOW 1568
- TABLE 313 OUI_VENDOR 1569
- TABLE 314 PHANTOM_PORT 1570
- TABLE 315 PHYSICAL_DEVICE 1570
- TABLE 316 PHYSICAL_INTERFACE 1571
- TABLE 317 PHYSICAL_PORT 1572
- TABLE 321 PM_DASHBOARD_WIDGET 1573
- TABLE 322 PM_DATA_COLLECTOR 1574
- TABLE 323 PM_MEASURE 1575
- TABLE 332 POE_THRESHOLD 1577
- TABLE 333 POE_THRESHOLD_EVENT 1577
- PORT_BOTTLENECK_CONFIG 1578
- PORT_BOTTLENECK_STATUS 1578
- PORT_COMMISSION_CIMOM_SERVER 1578
- TABLE 337 PORT_FENCING_POLICY 1579
- TABLE 339 PORT_PROFILE 1580
- PORT_PROFILE_MAC_MAP 1581
- PORT_PROFILE_QOS_MAP 1581
- PORT_PROFILE_QOS_PFC_MAP 1581
- TABLE 346 PRIVILEGE 1583
- TABLE 347 PRODUCT_APP 1583
- TABLE 348 PROTOCOL_VLAN 1584
- TABLE 349 QRTZ_BLOB_TRIGGERS 1584
- TABLE 350 QRTZ_CALENDARS 1584
- TABLE 351 QRTZ_CRON_TRIGGERS 1584
- TABLE 352 QRTZ_FIRED_TRIGGERS 1584
- TABLE 363 REPORT_TYPE 1587
- TABLE 364 REPORT_TEMPLATE 1587
- • 0= Not Hidden 1588
- • 1= Hidden 1588
- TABLE 371 SAN 1589
- TABLE 372 SAN_CONNECTION 1589
- TABLE 373 SCOM_HOST 1590
- TABLE 374 SECURITY_POLICY 1590
- TABLE 376 SENSOR 1591
- TABLE 377 SFLOW_CHECKPOINT 1592
- TABLE 378 SFLOW_HOUR_SUMMARY 1592
- TABLE 376 SENSOR (Continued) 1592
- • 0 means its edge port 1594
- • 1 means its trill port 1594
- TABLE 382 SFLOW_MINUTE_L3 1595
- • 1 means its fabric port 1596
- TABLE 387 SFLOW_MINUTE_VLAN 1597
- TABLE 391 SFLOW_STAGING 1598
- SFLOW_STAGING (Continued) 1599
- TABLE 392 SFLOW_STAGING_SLNUM 1600
- TABLE 393 SLOT 1600
- TABLE 394 SMART_CARD 1600
- • 1-Pre snapshot 1601
- • 2-Post snapshot 1601
- • device level collector is 0 1602
- TABLE 399 SNMP_DATA_1DAY 1603
- TABLE 400 SNMP_DATA_2HOUR 1603
- TABLE 401 SNMP_DATA_30MIN 1603
- • device - 0 or 1604
- • interface or ports - 1 1604
- TABLE 406 SNMP_EXPRESSION 1605
- TABLE 407 SNMP_PROFILE 1605
- SNMP_PROFILE (Continued) 1606
- TABLE 410 SSL_KEY_PASSWORD 1607
- TABLE 411 STATS_AGING 1607
- TABLE 412 SUB_INTERFACE 1608
- TABLE 413 SUB_PORT_VLAN 1608
- TABLE 416 SWITCH_LICENSE 1609
- TABLE 417 SWITCH_MODEL 1609
- TABLE 418 SWITCH_PORT 1610
- SWITCH_PORT (Continued) 1611
- TABLE 421 SYSTEM_PROPERTY 1614
- TABLE 422 TARGET_TYPE 1615
- TABLE 423 THIRD_PARTY_DEVICE 1615
- TABLE 424 THRESHOLD_MEASURE 1615
- TABLE 425 TIME_SERIES_DATA 1615
- TIME_SERIES_DATA_1DAY 1616
- TIME_SERIES_DATA_2HOUR 1616
- TIME_SERIES_DATA_30MIN 1616
- TIME_SERIES_DATA (Continued) 1616
- TABLE 429 TIME_SERIES_DATA_1 1617
- TIME_SERIES_DATA_1_1DAY 1618
- TIME_SERIES_DATA_1_2HOUR 1618
- TIME_SERIES_DATA_1_30MIN 1619
- TABLE 433 TIME_SERIES_DATA_2 1620
- TIME_SERIES_DATA_2_2HOUR 1621
- TABLE 437 TIME_SERIES_DATA_3 1622
- TIME_SERIES_DATA_3_1DAY 1623
- TIME_SERIES_DATA_3_2HOUR 1623
- TIME_SERIES_DATA_3_30MIN 1624
- TABLE 441 TIME_SERIES_DATA_4 1625
- TIME_SERIES_DATA_4_2HOUR 1626
- TIME_SERIES_DATA_4_30MIN 1626
- TABLE 445 TOOL_APP 1627
- TABLE 446 TOOL_PATH 1627
- TABLE 447 TOPO_MAP_IMAGE 1627
- TABLE 448 TRILL 1628
- TABLE 449 TRILL_TRUNK_GROUP 1628
- TABLE 450 TRILL_TRUNK_MEMBER 1628
- • 0=Disabled 1629
- • 1=Enabled 1629
- TABLE 453 USER_ (Continued) 1630
- TABLE 457 USER_PREFERENCE 1631
- TABLE 459 USER_RESOURCE_MAP 1631
- TABLE 460 USER_ROLE_MAP 1631
- • Loose(0) 1632
- • Strict(1) 1632
- • Disabled(0) 1633
- • Enabled(1) 1633
- • 0? Virtual Server 1634
- • 1 ? Real Server 1634
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1635
- VIRTUAL_FCOE_PORT_STAT 1635
- VIRTUAL_FCOE_PORT (Continued) 1635
- VIRTUAL_FCOE_PORT_STAT_2HR 1636
- VIRTUAL_FCOE_PORT_STAT_30M 1637
- • 1-Enabled 1638
- • 0-disabled 1638
- • 0 is switch mode 1638
- • 2 is ag mode 1638
- VIRTUAL_SWITCH (Continued) 1639
- VIRTUAL_SWITCH_CAPABILITY 1642
- VIRTUAL_SWITCH_CHECKSUM 1642
- VIRTUAL_SWITCH_COLLECTION 1642
- TABLE 484 VLL_DEVICE_RELATION 1644
- TABLE 486 VMOTION_EVENT 1644
- TABLE 488 VM_DATA_CENTER 1645
- TABLE 490 VM_DV_PORT 1646
- TABLE 491 VM_DV_PORT_GROUP 1647
- TABLE 492 VM_DV_SWITCH 1648
- TABLE 494 VM_FC_HBA 1649
- • Fabric 1650
- • Point to point 1650
- • Unknown 1650
- VM_HOST_END_DEV_CONNECTIVITY 1651
- VM_HOST_PROXY_SWITCH 1651
- VM_HOST (Continued) 1651
- TABLE 500 VM_HOST_VIRTUAL_NIC 1652
- TABLE 501 VM_NETWORK_SETTINGS 1653
- TABLE 503 VM_PATH 1654
- TABLE 504 VM_PHYSICAL_NIC 1655
- TABLE 503 VM_PATH (Continued) 1655
- TABLE 505 VM_SECURITY_POLICY 1656
- • VMKernel 1657
- • Service Console 1657
- TABLE 509 VM_STORAGE 1658
- TABLE 512 VM_VCENTER 1659
- TABLE 513 VM_VCENTER_MEMBER 1660
- TABLE 515 VM_VIRTUAL_MACHINE 1662
- VPLS_DEVICE_RELATION 1663
- VPLS_ENDPOINT_RELATION 1663
- TABLE 519 VR_CONN_DOMAIN 1664
- TABLE 522 VR_CONN_MODULE 1665
- TABLE 523 VR_CONN_MODULE_PORT 1665
- TABLE 525 VR_CONN_WWN 1666
- TABLE 526 WT_ARCHIVE 1666
- TABLE 527 ZONE 1666
- TABLE 528 ZONE_ALIAS 1667
- TABLE 529 ZONE_ALIAS_IN_ZONE 1667
- TABLE 530 ZONE_ALIAS_MEMBER 1667
- TABLE 531 ZONE_DB 1667
- TABLE 527 ZONE (Continued) 1667
- TABLE 532 ZONE_DB_CONFIG 1668
- TABLE 533 ZONE_DB_USERS 1668
- TABLE 534 ZONE_IN-ZONE_SET 1668
- TABLE 535 ZONE_MEMBER 1668
- TABLE 531 ZONE_DB (Continued) 1668
- ADAPTER_PORT_CONFIG_INFO 1669
- AG_CONNECTION_INFO 1669
- BOOT_IMAGE_FILE_DETAILS_INFO 1670
- CNA_ETH_PORT_CONFIG_INFO 1670
- CNA_PORT_DETAILS_INFO 1671
- CNA_PORT_INFO 1671
- CORE_SWITCH_DETAILS_INFO 1672
- CRYPTO_HOST_LUN_INFO 1673
- CRYPTO_TARGET_ENGINE_INFO 1674
- DASHBOARD_PREFERENCES_INFO 1674
- DEPLOYMENT_INFO 1675
- DEPLOYMENT_LOG 1675
- DEVICE_CONNECTION_INFO 1676
- EE_MONITOR_STATS_5MIN_INFO 1677
- EE_MONITOR_STATS_30MIN_INFO 1677
- EE_MONITOR_STATS_2HOUR_INFO 1677
- EE_MONITOR_STATS_1DAY_INFO 1678
- TE_PORT_STATS_5MIN_INFO 1678
- TE_PORT_STATS_30MIN_INFO 1678
- TE_PORT_STATS_2HOUR_INFO 1679
- TE_PORT_STATS_1DAY_INFO 1679
- SWITCH_INFO 1680
- DEVICE_INFO 1682
- N2F_PORT_MAP_INFO 1683
- DEVICE_NODE_INFO 1683
- DEVICE_PORT_INFO 1684
- DEV_PORT_GIGE_PORT_LINK_INFO 1685
- DEV_PORT_MAC_ADDR_MAP_INFO 1686
- ISL_CONNECTION_INFO 1686
- ISL_INFO 1687
- ETHERNET_ISL_INFO 1688
- EVENT_DETAILS_INFO 1688
- EVENT_INFO 1689
- FABRIC_INFO 1690
- FCIP_TUNNEL_CIRCUIT_INFO 1691
- FCIP_TUNNEL_INFO 1692
- FCOE_DEVICE_INFO 1693
- FRU_INFO 1694
- GIGE_PORT_ECLOUD_LINK_INFO 1694
- GIGE_PORT_INFO 1695
- HBA_PORT_DETAILS_INFO 1695
- HBA_TARGET_INFO 1697
- HEALTH_STATUS_INFO 1698
- HOST_DISCOVERY_REQUEST_INFO 1699
- IFL_INFO 1700
- ISL_TRILL_INFO 1701
- ISL_TRUNK_GROUP_MEMBER_INFO 1703
- ISL_TRUNK_INFO 1703
- L2_NEIGHBOR_INFO 1704
- MAPS_EVENT_DETAILS_INFO 1704
- MODULE_INFO 1705
- NPORT_WWN_MAP_INFO 1706
- PHANTOM_PORT_INFO 1707
- PRODUCT_INFO 1707
- PORT_BOTTLENECK_CONF_INFO 1710
- PORT_BOTTLENECK_STAT_INFO 1710
- PORT_GROUP_INFO 1710
- ROLE_PRIVILEGE_INFO 1711
- PORT_PROFILE_INFO 1711
- PORT_PROFILE_INTERFACE_INFO 1712
- PORT_PROFILE_MAC_INFO 1712
- PORT_VLAN_INFO 1713
- SFLOW_MINUTE_L3_VIEW 1715
- SFLOW_MINUTE_MAC_VIEW 1716
- SCOM_EE_MONITOR_INFO 1717
- SENSOR_INFO 1718
- SMART_CARD_USAGE_INFO 1718
- SWITCH_CONFIG_INFO 1719
- SWITCH_DETAILS_INFO 1720
- SWITCH_DISCOVERED_MAC_INFO 1722
- SWITCH_PORT_INFO 1722
- SWITCH_SNMP_INFO 1724
- TIME_SERIES_DATA_INFO 1726
- TIME_SERIES_DATA_VIEW 1727
- TRILL_INFO 1728
- TRILL_TRUNK_INFO 1729
- USER_ROLE_RESOURCE_INFO 1729
- VIRTUAL_FCOE_PORT_INFO 1730
- VIRTUAL_PORT_WWN_DETAILS_INFO 1730
- VM_ADDRESS_INFO 1731
- VM_CONNECTIVITY_INFO 1732
- VM_DATASTORE_DETAILS_INFO 1734
- VM_EE_MONITOR_INFO 1735
- VM_HOST_INFO 1735
- VM_LUN_INFO 1736
- VM_STATISTICS_INFO 1737
- VR_CONN_MODULE_INFO 1739
- VR_CONN_MODULE_PORT_INFO 1740
- VR_CONN_NPIV_INFO 1741
- VMM_DISCOVERED_MAC_INFO 1742
- ZONE_DB_INFO 1743
- PHYSICAL_DEVICE_INFO 1747
- SLOT_INFO 1747
- MANAGED_ELEMENT_INFO 1747
- SNMP_DATA_INFO 1748
- SNMP_EXPR_DATA_INFO 1748
- SNMP_DATA_VIEW 1748
- VM_VNETWORK_INFO 1750
- VCS_CLUSTER_MEMBER_INFO 1752
- RESET_VCS_LICENSED 1752
- WIRELESS_INTERFACE 1753
- WIRED_INTERFACE 1754
- CEE_PORT_INFO 1755
Produits connexes et manuels pour Logiciel Brocade Network Advisor IP User Manual v12.1.0
(93 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.083 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels