Brocade Network Advisor Port Commissioning Quick Start Gui Manuel d'utilisateur télécharger pdf (Page 16)

16 of 21 Brocade Network Advisor Port Commissioning Quick Start Guide

Publication Number: 53-1003220-01

• Force — Select to force decommission on the N-Port connected to the F-Port. The Management application

contacts all registered CIMOM servers within the fabric affected by the action, but forces the N-Port

decommission regardless of the CIMOM server response.

NOTE

You cannot force decommission on an F-Port.

NOTE

If any CIMOM server is not reachable or the credentials fail, port decommission does not occur.

3. Click OK on the Port Commission Confirmation dialog box.

While decommissioning is in progress, a down arrow icon displays next to the port icon in the Product List. You

can view the port commissioning results in the deployment reports (refer to “Viewing a port commissioning

deployment report” on page 18).

When the decommission is complete, an application event displays in the Master Log detailing success or

failure.

Recommissioning all ports on a blade

NOTE

All ports on the blade must be managed by the Management application.

NOTE

You can only recommission ports from the logical switch, not the physical chassis.

Select a port on the blade for which you want to recommission all ports in the Product List, then select Configure >

Port Commissioning > Recommission > All Ports on the Switch/Blade.

While recommissioning is in progress, an up arrow icon displays next to the port icon in the Product List. You can

view the port commissioning results in the deployment reports (refer to “Viewing a port commissioning deployment

report” on page 18).

When the recommission is complete, an application event displays in the Master Log detailing success or failure.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Pas de commentaire

Brocade Network Advisor Port Commissioning Quick Start Gui Manuel d'utilisateur Page 16