Brocade Network OS NETCONF Operations Guide v4.1.1 Manuel d'utilisateur télécharger pdf (Page 123)

100

101

Network OS NETCONF Operations Guide 91

53-1003231-02

Fabric interface configuration management

a. In the <rbridge-id> leaf element, specify the RBridge ID of the switch for which you want to

change the priority.

b. In the <priority> field, specify the new priority in the range 1 through 255.

The following example sets the priority of routing bridge 12 to 10.

<edit-config>

</target>

<route>

<mcast>

<rbridge-id>

<rbridge-id>12</rbridge-id>

</rbridge-id>

</mcast>

</route>

</fabric>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="1207" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Obtaining the running configuration

You can use the <get-config> RPC to return fabric route multicast configuration information. The

configuration currently effective on the switch is referred to as the running configuration. Any

configuration change you make while the switch is online is made to the running configuration. The

running configuration is nonpersistent.

NOTE

To save configuration changes, you must save the running-config file to a file, or you can apply the

changes by copying the running configuration to the startup configuration.

To obtain the route multicast configuration, issue the <get-config> RPC with a subtree filter that

restricts the output to the contents of the <fabric>/</route>/<mcast> node, as show in the

following example.

<?xml version="1.0" encoding="UTF-8"?>

<get-config>

</source>

<route>

</route>

</fabric>

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 621 622

Commentaires sur ces manuels

Pas de commentaire

Brocade Network OS NETCONF Operations Guide v4.1.1 Manuel d'utilisateur Page 123

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour ordinateurs Brocade Network OS NETCONF Operations Guide v4.1.1